• From: Cape Town, SA
  • Registered: 2009-03-18
  • Posts: 48

Topic: [SOLVED] Laptop boot hangs at starting udev

Hi,

Having sporadic hang-ups with my Lenovo T60 laptop running Statler Alpha2.
The system is up-to-date (I regularly do an apt-get update and apt-get upgrade).

At boot it sometimes stops at this screen (reproduced from a scribbled note as screen dumps are unavailable):

Starting udev
boot in runlevel S
/lib/live/config.sh=not found
dispatcher=udevd
plugevents...done
populated...

And I have to hard reset.
Occasionally this happens twice and then I get a normal boot. Days may go by before a re-occurrence  - I wonder if any damage occurs to the installation...

lspci gives:

00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port (rev 03)
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 02)
00:1c.2 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 3 (rev 02)
00:1c.3 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 4 (rev 02)
00:1d.0 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02)
00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA AHCI Controller (rev 02)
00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 02)
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility X1400
02:00.0 Ethernet controller: Intel Corporation 82573L Gigabit Ethernet Controller
03:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)
15:00.0 CardBus bridge: Texas Instruments PCI1510 PC card Cardbus Controller

The list is quite about this particular error, so I guess I'm the first? - there is this udev thread:
http://crunchbanglinux.org/forums/topic … ot-solved/ but it is not quite the same.

Any ideas on what I could look for?

Edit: added [SOLVED] to Topic subject - see dom's post (#9) below.

Cheers,

Last edited by hapenny (2010-12-02 15:26:58)

A day without chilies is a day wasted
  • Registered: 2010-11-08
  • Posts: 1

Re: [SOLVED] Laptop boot hangs at starting udev

Perhaps when it does manage to boot and get past udev, post the contents of "dmesg" which will hopefully contain a hint as to what is going on.

  • From: Cape Town, SA
  • Registered: 2009-03-18
  • Posts: 48

Re: [SOLVED] Laptop boot hangs at starting udev

derfury wrote:

Perhaps when it does manage to boot and get past udev, post the contents of "dmesg" which will hopefully contain a hint as to what is going on.

Here is an unabridged copy after a successful boot this morning (SA time :-)) - I see no way to add attachments to posts:

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.32-5-686 (Debian 2.6.32-27) (maks@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Sat Oct 30 22:47:19 UTC 2010
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[    0.000000]  BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
[    0.000000]  BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000007fed0000 (usable)
[    0.000000]  BIOS-e820: 000000007fed0000 - 000000007fedf000 (ACPI data)
[    0.000000]  BIOS-e820: 000000007fedf000 - 000000007ff00000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved)
[    0.000000]  BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[    0.000000]  BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
[    0.000000] DMI present.
[    0.000000] last_pfn = 0x7fed0 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-DBFFF uncachable
[    0.000000]   DC000-DFFFF write-back
[    0.000000]   E0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 07FF00000 mask FFFF00000 uncachable
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] initial memory mapped : 0 - 01800000
[    0.000000] init_memory_mapping: 0000000000000000-00000000373fe000
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0037000000 page 2M
[    0.000000]  0037000000 - 00373fe000 page 4k
[    0.000000] kernel direct mapping tables up to 373fe000 @ 7000-d000
[    0.000000] RAMDISK: 377c6000 - 37fef89e
[    0.000000] Allocated new RAMDISK: 00100000 - 0092989e
[    0.000000] Move RAMDISK from 00000000377c6000 - 0000000037fef89d to 00100000 - 0092989d
[    0.000000] ACPI: RSDP 000f67e0 00024 (v02 LENOVO)
[    0.000000] ACPI: XSDT 7fed14b0 0008C (v01 LENOVO TP-7I    00001170  LTP 00000000)
[    0.000000] ACPI: FACP 7fed1600 000F4 (v03 LENOVO TP-7I    00001170 LNVO 00000001)
[    0.000000] ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32 (20090903/tbfadt-526)
[    0.000000] ACPI Warning: Optional field Gpe1Block has zero address or length: 000000000000102C/0 (20090903/tbfadt-557)
[    0.000000] ACPI: DSDT 7fed195e 0D2D9 (v01 LENOVO TP-7I    00001170 MSFT 0100000E)
[    0.000000] ACPI: FACS 7fef4000 00040
[    0.000000] ACPI: SSDT 7fed17b4 001AA (v01 LENOVO TP-7I    00001170 MSFT 0100000E)
[    0.000000] ACPI: ECDT 7fedec37 00052 (v01 LENOVO TP-7I    00001170 LNVO 00000001)
[    0.000000] ACPI: TCPA 7fedec89 00032 (v02 LENOVO TP-7I    00001170 LNVO 00000001)
[    0.000000] ACPI: APIC 7fedecbb 00068 (v01 LENOVO TP-7I    00001170 LNVO 00000001)
[    0.000000] ACPI: MCFG 7feded23 0003C (v01 LENOVO TP-7I    00001170 LNVO 00000001)
[    0.000000] ACPI: HPET 7feded5f 00038 (v01 LENOVO TP-7I    00001170 LNVO 00000001)
[    0.000000] ACPI: SLIC 7fedee62 00176 (v01 LENOVO TP-7I    00001170  LTP 00000000)
[    0.000000] ACPI: BOOT 7fedefd8 00028 (v01 LENOVO TP-7I    00001170  LTP 00000001)
[    0.000000] ACPI: SSDT 7fef2697 0025F (v01 LENOVO TP-7I    00001170 INTL 20050513)
[    0.000000] ACPI: SSDT 7fef28f6 000A6 (v01 LENOVO TP-7I    00001170 INTL 20050513)
[    0.000000] ACPI: SSDT 7fef299c 004F7 (v01 LENOVO TP-7I    00001170 INTL 20050513)
[    0.000000] ACPI: SSDT 7fef2e93 001D8 (v01 LENOVO TP-7I    00001170 INTL 20050513)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 1162MB HIGHMEM available.
[    0.000000] 883MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 373fe000
[    0.000000]   low ram: 0 - 373fe000
[    0.000000]   node 0 low ram: 00000000 - 373fe000
[    0.000000]   node 0 bootmap 00009000 - 0000fe80
[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
[    0.000000]   #3 [0001000000 - 00014c7bb4]    TEXT DATA BSS ==> [0001000000 - 00014c7bb4]
[    0.000000]   #4 [000009f000 - 0000100000]    BIOS reserved ==> [000009f000 - 0000100000]
[    0.000000]   #5 [00014c8000 - 00014ce16c]              BRK ==> [00014c8000 - 00014ce16c]
[    0.000000]   #6 [0000007000 - 0000009000]          PGTABLE ==> [0000007000 - 0000009000]
[    0.000000]   #7 [0000100000 - 000092989e]      NEW RAMDISK ==> [0000100000 - 000092989e]
[    0.000000]   #8 [0000009000 - 0000010000]          BOOTMAP ==> [0000009000 - 0000010000]
[    0.000000] found SMP MP-table at [c00f6810] f6810
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000000 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000373fe
[    0.000000]   HighMem  0x000373fe -> 0x0007fed0
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0007fed0
[    0.000000] On node 0 totalpages: 523887
[    0.000000] free_area_init_node: node 0, pgdat c13b2720, node_mem_map c14d0000
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3967 pages, LIFO batch:0
[    0.000000]   Normal zone: 1736 pages used for memmap
[    0.000000]   Normal zone: 220470 pages, LIFO batch:31
[    0.000000]   HighMem zone: 2326 pages used for memmap
[    0.000000]   HighMem zone: 295356 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 24
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
[    0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
[    0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000
[    0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:70000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @c2800000 s34296 r0 d23048 u2097152
[    0.000000] pcpu-alloc: s34296 r0 d23048 u2097152 alloc=1*4194304
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 519793
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-686 root=UUID=770a1f13-bc57-49dc-80e9-7c9b6c6abf6b ro quiet
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000373fe:0007fed0)
[    0.000000] Memory: 2063932k/2095936k available (2499k kernel code, 30652k reserved, 1324k data, 372k init, 1190728k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xffd56000 - 0xfffff000   (2724 kB)
[    0.000000]     pkmap   : 0xff400000 - 0xff800000   (4096 kB)
[    0.000000]     vmalloc : 0xf7bfe000 - 0xff3fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf73fe000   ( 883 MB)
[    0.000000]       .init : 0xc13bd000 - 0xc141a000   ( 372 kB)
[    0.000000]       .data : 0xc1270fd9 - 0xc13bc320   (1324 kB)
[    0.000000]       .text : 0xc1000000 - 0xc1270fd9   (2499 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:1280
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1994.966 MHz processor.
[    0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 3989.93 BogoMIPS (lpj=7979864)
[    0.004021] Security Framework initialized
[    0.004026] SELinux:  Disabled at boot.
[    0.004033] Mount-cache hash table entries: 512
[    0.004155] Initializing cgroup subsys ns
[    0.004159] Initializing cgroup subsys cpuacct
[    0.004163] Initializing cgroup subsys devices
[    0.004165] Initializing cgroup subsys freezer
[    0.004167] Initializing cgroup subsys net_cls
[    0.004191] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.004193] CPU: L2 cache: 4096K
[    0.004195] CPU: Physical Processor ID: 0
[    0.004197] CPU: Processor Core ID: 0
[    0.004201] mce: CPU supports 6 MCE banks
[    0.004209] CPU0: Thermal monitoring enabled (TM2)
[    0.004212] using mwait in idle threads.
[    0.004219] Performance Events: Core2 events, Intel PMU driver.
[    0.004225] ... version:                2
[    0.004227] ... bit width:              40
[    0.004228] ... generic registers:      2
[    0.004230] ... value mask:             000000ffffffffff
[    0.004232] ... max period:             000000007fffffff
[    0.004234] ... fixed-purpose events:   3
[    0.004235] ... event mask:             0000000700000003
[    0.004239] Checking 'hlt' instruction... OK.
[    0.021152] ACPI: Core revision 20090903
[    0.036064] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.036446] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.077969] CPU0: Intel(R) Core(TM)2 CPU         T7200  @ 2.00GHz stepping 06
[    0.080001] Booting processor 1 APIC 0x1 ip 0x6000
[    0.008000] Initializing CPU#1
[    0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.008000] CPU: L2 cache: 4096K
[    0.008000] CPU: Physical Processor ID: 0
[    0.008000] CPU: Processor Core ID: 1
[    0.008000] CPU1: Thermal monitoring enabled (TM2)
[    0.164067] CPU1: Intel(R) Core(TM)2 CPU         T7200  @ 2.00GHz stepping 06
[    0.164080] checking TSC synchronization [CPU#0 -> CPU#1]:
[    0.168001] Measured 617424 cycles TSC warp between CPUs, turning off TSC clock.
[    0.168001] Marking TSC unstable due to check_tsc_sync_source failed
[    0.168050] Brought up 2 CPUs
[    0.168053] Total of 2 processors activated (7979.97 BogoMIPS).
[    0.168698] CPU0 attaching sched-domain:
[    0.168702]  domain 0: span 0-1 level MC
[    0.168704]   groups: 0 1
[    0.168709] CPU1 attaching sched-domain:
[    0.168711]  domain 0: span 0-1 level MC
[    0.168714]   groups: 1 0
[    0.168771] devtmpfs: initialized
[    0.168771] regulator: core version 0.5
[    0.168771] NET: Registered protocol family 16
[    0.168771] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.168771] ACPI: bus type pci registered
[    0.168771] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
[    0.168771] PCI: MCFG area at f0000000 reserved in E820
[    0.168771] PCI: Using MMCONFIG for extended config space
[    0.168771] PCI: Using configuration type 1 for base access
[    0.168771] bio: create slab <bio-0> at 0
[    0.169045] ACPI: EC: EC description table is found, configuring boot EC
[    0.180779] ACPI: Interpreter enabled
[    0.180783] ACPI: (supports S0 S3 S4 S5)
[    0.180804] ACPI: Using IOAPIC for interrupt routing
[    0.189219] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[    0.189265] ACPI: Power Resource [PUBS] (on)
[    0.192020] ACPI: ACPI Dock Station Driver: 3 docks/bays found
[    0.192482] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.192601] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.192605] pci 0000:00:01.0: PME# disabled
[    0.192696] pci 0000:00:1b.0: reg 10 64bit mmio: [0xee400000-0xee403fff]
[    0.192758] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.192763] pci 0000:00:1b.0: PME# disabled
[    0.192856] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.192861] pci 0000:00:1c.0: PME# disabled
[    0.192957] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.192962] pci 0000:00:1c.1: PME# disabled
[    0.193061] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.193066] pci 0000:00:1c.2: PME# disabled
[    0.193163] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.193168] pci 0000:00:1c.3: PME# disabled
[    0.193234] pci 0000:00:1d.0: reg 20 io port: [0x1800-0x181f]
[    0.193299] pci 0000:00:1d.1: reg 20 io port: [0x1820-0x183f]
[    0.193365] pci 0000:00:1d.2: reg 20 io port: [0x1840-0x185f]
[    0.193430] pci 0000:00:1d.3: reg 20 io port: [0x1860-0x187f]
[    0.193499] pci 0000:00:1d.7: reg 10 32bit mmio: [0xee404000-0xee4043ff]
[    0.193562] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.193568] pci 0000:00:1d.7: PME# disabled
[    0.193742] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[    0.193747] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
[    0.193751] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f)
[    0.193756] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f)
[    0.193760] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f)
[    0.193815] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[    0.193823] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[    0.193831] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[    0.193839] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[    0.193847] pci 0000:00:1f.1: reg 20 io port: [0x1880-0x188f]
[    0.193914] pci 0000:00:1f.2: reg 10 io port: [0x18c8-0x18cf]
[    0.193922] pci 0000:00:1f.2: reg 14 io port: [0x18ac-0x18af]
[    0.193930] pci 0000:00:1f.2: reg 18 io port: [0x18c0-0x18c7]
[    0.193938] pci 0000:00:1f.2: reg 1c io port: [0x18a8-0x18ab]
[    0.193946] pci 0000:00:1f.2: reg 20 io port: [0x18b0-0x18bf]
[    0.193954] pci 0000:00:1f.2: reg 24 32bit mmio: [0xee404400-0xee4047ff]
[    0.193992] pci 0000:00:1f.2: PME# supported from D3hot
[    0.193997] pci 0000:00:1f.2: PME# disabled
[    0.194062] pci 0000:00:1f.3: reg 20 io port: [0x18e0-0x18ff]
[    0.194160] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xd8000000-0xdfffffff]
[    0.194173] pci 0000:01:00.0: reg 14 io port: [0x2000-0x20ff]
[    0.194186] pci 0000:01:00.0: reg 18 32bit mmio: [0xee100000-0xee10ffff]
[    0.194225] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[    0.194276] pci 0000:01:00.0: supports D1 D2
[    0.194318] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.194368] pci 0000:00:01.0: bridge io port: [0x2000-0x2fff]
[    0.194371] pci 0000:00:01.0: bridge 32bit mmio: [0xee100000-0xee1fffff]
[    0.194376] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd8000000-0xdfffffff]
[    0.194519] pci 0000:02:00.0: reg 10 32bit mmio: [0xee000000-0xee01ffff]
[    0.194544] pci 0000:02:00.0: reg 18 io port: [0x3000-0x301f]
[    0.194651] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.194659] pci 0000:02:00.0: PME# disabled
[    0.194715] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.194767] pci 0000:00:1c.0: bridge io port: [0x3000-0x3fff]
[    0.194772] pci 0000:00:1c.0: bridge 32bit mmio: [0xee000000-0xee0fffff]
[    0.194962] pci 0000:03:00.0: reg 10 32bit mmio: [0xedf00000-0xedf00fff]
[    0.195205] pci 0000:03:00.0: PME# supported from D0 D3hot
[    0.195217] pci 0000:03:00.0: PME# disabled
[    0.195324] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.195376] pci 0000:00:1c.1: bridge io port: [0x4000-0x5fff]
[    0.195381] pci 0000:00:1c.1: bridge 32bit mmio: [0xec000000-0xedffffff]
[    0.195389] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xe4000000-0xe40fffff]
[    0.195449] pci 0000:00:1c.2: bridge io port: [0x6000-0x7fff]
[    0.195454] pci 0000:00:1c.2: bridge 32bit mmio: [0xe8000000-0xe9ffffff]
[    0.195462] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xe4100000-0xe41fffff]
[    0.195522] pci 0000:00:1c.3: bridge io port: [0x8000-0x9fff]
[    0.195527] pci 0000:00:1c.3: bridge 32bit mmio: [0xea000000-0xebffffff]
[    0.195535] pci 0000:00:1c.3: bridge 64bit mmio pref: [0xe4200000-0xe42fffff]
[    0.195589] pci 0000:15:00.0: reg 10 32bit mmio: [0xe4300000-0xe4300fff]
[    0.195619] pci 0000:15:00.0: supports D1 D2
[    0.195621] pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.195627] pci 0000:15:00.0: PME# disabled
[    0.195707] pci 0000:00:1e.0: transparent bridge
[    0.195712] pci 0000:00:1e.0: bridge io port: [0xa000-0xdfff]
[    0.195717] pci 0000:00:1e.0: bridge 32bit mmio: [0xe4300000-0xe7ffffff]
[    0.195725] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xe0000000-0xe3ffffff]
[    0.195783] pci_bus 0000:00: on NUMA node 0
[    0.195788] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.195908] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[    0.195974] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
[    0.196045] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[    0.196110] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[    0.196182] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
[    0.196252] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[    0.200708] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[    0.200894] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[    0.201076] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[    0.201258] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[    0.201440] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[    0.201621] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
[    0.201802] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
[    0.201983] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[    0.202112] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.202116] vgaarb: loaded
[    0.202129] PCI: Using ACPI for IRQ routing
[    0.202129] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.202129] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.208018] Switching to clocksource hpet
[    0.209334] pnp: PnP ACPI init
[    0.209342] ACPI: bus type pnp registered
[    0.212894] pnp: PnP ACPI: found 12 devices
[    0.212897] ACPI: ACPI bus type pnp unregistered
[    0.212900] PnPBIOS: Disabled by ACPI PNP
[    0.212909] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[    0.212912] system 00:00: iomem range 0xc0000-0xc3fff could not be reserved
[    0.212915] system 00:00: iomem range 0xc4000-0xc7fff could not be reserved
[    0.212918] system 00:00: iomem range 0xc8000-0xcbfff could not be reserved
[    0.212921] system 00:00: iomem range 0xcc000-0xcffff could not be reserved
[    0.212924] system 00:00: iomem range 0xd0000-0xd3fff could not be reserved
[    0.212927] system 00:00: iomem range 0xdc000-0xdffff could not be reserved
[    0.212930] system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
[    0.212933] system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
[    0.212936] system 00:00: iomem range 0xe8000-0xebfff could not be reserved
[    0.212939] system 00:00: iomem range 0xec000-0xeffff could not be reserved
[    0.212942] system 00:00: iomem range 0xf0000-0xfffff could not be reserved
[    0.212945] system 00:00: iomem range 0x100000-0x7fffffff could not be reserved
[    0.212948] system 00:00: iomem range 0xfec00000-0xfed3ffff could not be reserved
[    0.212951] system 00:00: iomem range 0xfed41000-0xffffffff could not be reserved
[    0.212958] system 00:02: ioport range 0x164e-0x164f has been reserved
[    0.212961] system 00:02: ioport range 0x1000-0x107f has been reserved
[    0.212964] system 00:02: ioport range 0x1180-0x11bf has been reserved
[    0.212967] system 00:02: ioport range 0x800-0x80f has been reserved
[    0.212970] system 00:02: ioport range 0x15e0-0x15ef has been reserved
[    0.212973] system 00:02: ioport range 0x1600-0x165f could not be reserved
[    0.212977] system 00:02: iomem range 0xf0000000-0xf3ffffff has been reserved
[    0.212980] system 00:02: iomem range 0xfed1c000-0xfed1ffff has been reserved
[    0.212983] system 00:02: iomem range 0xfed14000-0xfed17fff has been reserved
[    0.212986] system 00:02: iomem range 0xfed18000-0xfed18fff has been reserved
[    0.212989] system 00:02: iomem range 0xfed19000-0xfed19fff has been reserved
[    0.247772] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    0.247775] pci 0000:00:01.0:   IO window: 0x2000-0x2fff
[    0.247780] pci 0000:00:01.0:   MEM window: 0xee100000-0xee1fffff
[    0.247783] pci 0000:00:01.0:   PREFETCH window: 0x000000d8000000-0x000000dfffffff
[    0.247789] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[    0.247792] pci 0000:00:1c.0:   IO window: 0x3000-0x3fff
[    0.247799] pci 0000:00:1c.0:   MEM window: 0xee000000-0xee0fffff
[    0.247804] pci 0000:00:1c.0:   PREFETCH window: 0x00000080000000-0x000000801fffff
[    0.247812] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[    0.247816] pci 0000:00:1c.1:   IO window: 0x4000-0x5fff
[    0.247822] pci 0000:00:1c.1:   MEM window: 0xec000000-0xedffffff
[    0.247827] pci 0000:00:1c.1:   PREFETCH window: 0x000000e4000000-0x000000e40fffff
[    0.247835] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
[    0.247839] pci 0000:00:1c.2:   IO window: 0x6000-0x7fff
[    0.247846] pci 0000:00:1c.2:   MEM window: 0xe8000000-0xe9ffffff
[    0.247851] pci 0000:00:1c.2:   PREFETCH window: 0x000000e4100000-0x000000e41fffff
[    0.247859] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:0c
[    0.247862] pci 0000:00:1c.3:   IO window: 0x8000-0x9fff
[    0.247869] pci 0000:00:1c.3:   MEM window: 0xea000000-0xebffffff
[    0.247874] pci 0000:00:1c.3:   PREFETCH window: 0x000000e4200000-0x000000e42fffff
[    0.247884] pci 0000:15:00.0: CardBus bridge, secondary bus 0000:16
[    0.247886] pci 0000:15:00.0:   IO window: 0x00a000-0x00a0ff
[    0.247892] pci 0000:15:00.0:   IO window: 0x00a400-0x00a4ff
[    0.247899] pci 0000:15:00.0:   PREFETCH window: 0xe0000000-0xe3ffffff
[    0.247905] pci 0000:15:00.0:   MEM window: 0x84000000-0x87ffffff
[    0.247911] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:15
[    0.247914] pci 0000:00:1e.0:   IO window: 0xa000-0xdfff
[    0.247921] pci 0000:00:1e.0:   MEM window: 0xe4300000-0xe7ffffff
[    0.247926] pci 0000:00:1e.0:   PREFETCH window: 0x000000e0000000-0x000000e3ffffff
[    0.247942] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.247946] pci 0000:00:01.0: setting latency timer to 64
[    0.247956] pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    0.247962] pci 0000:00:1c.0: setting latency timer to 64
[    0.247973] pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    0.247978] pci 0000:00:1c.1: setting latency timer to 64
[    0.247989] pci 0000:00:1c.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[    0.247994] pci 0000:00:1c.2: setting latency timer to 64
[    0.248015] pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[    0.248020] pci 0000:00:1c.3: setting latency timer to 64
[    0.248026] pci 0000:00:1e.0: enabling device (0005 -> 0007)
[    0.248032] pci 0000:00:1e.0: setting latency timer to 64
[    0.248045] pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.248052] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.248055] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.248058] pci_bus 0000:01: resource 0 io:  [0x2000-0x2fff]
[    0.248060] pci_bus 0000:01: resource 1 mem: [0xee100000-0xee1fffff]
[    0.248063] pci_bus 0000:01: resource 2 pref mem [0xd8000000-0xdfffffff]
[    0.248065] pci_bus 0000:02: resource 0 io:  [0x3000-0x3fff]
[    0.248068] pci_bus 0000:02: resource 1 mem: [0xee000000-0xee0fffff]
[    0.248070] pci_bus 0000:02: resource 2 pref mem [0x80000000-0x801fffff]
[    0.248073] pci_bus 0000:03: resource 0 io:  [0x4000-0x5fff]
[    0.248075] pci_bus 0000:03: resource 1 mem: [0xec000000-0xedffffff]
[    0.248078] pci_bus 0000:03: resource 2 pref mem [0xe4000000-0xe40fffff]
[    0.248080] pci_bus 0000:04: resource 0 io:  [0x6000-0x7fff]
[    0.248083] pci_bus 0000:04: resource 1 mem: [0xe8000000-0xe9ffffff]
[    0.248085] pci_bus 0000:04: resource 2 pref mem [0xe4100000-0xe41fffff]
[    0.248088] pci_bus 0000:0c: resource 0 io:  [0x8000-0x9fff]
[    0.248090] pci_bus 0000:0c: resource 1 mem: [0xea000000-0xebffffff]
[    0.248093] pci_bus 0000:0c: resource 2 pref mem [0xe4200000-0xe42fffff]
[    0.248095] pci_bus 0000:15: resource 0 io:  [0xa000-0xdfff]
[    0.248098] pci_bus 0000:15: resource 1 mem: [0xe4300000-0xe7ffffff]
[    0.248101] pci_bus 0000:15: resource 2 pref mem [0xe0000000-0xe3ffffff]
[    0.248103] pci_bus 0000:15: resource 3 io:  [0x00-0xffff]
[    0.248105] pci_bus 0000:15: resource 4 mem: [0x000000-0xffffffff]
[    0.248108] pci_bus 0000:16: resource 0 io:  [0xa000-0xa0ff]
[    0.248110] pci_bus 0000:16: resource 1 io:  [0xa400-0xa4ff]
[    0.248113] pci_bus 0000:16: resource 2 pref mem [0xe0000000-0xe3ffffff]
[    0.248115] pci_bus 0000:16: resource 3 mem: [0x84000000-0x87ffffff]
[    0.248141] NET: Registered protocol family 2
[    0.248213] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.248470] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.248847] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.249038] TCP: Hash tables configured (established 131072 bind 65536)
[    0.249040] TCP reno registered
[    0.249100] NET: Registered protocol family 1
[    0.249217] pci 0000:01:00.0: Boot video device
[    0.249263] Unpacking initramfs...
[    0.486838] Freeing initrd memory: 8358k freed
[    0.491527] Simple Boot Flag at 0x35 set to 0x1
[    0.491849] audit: initializing netlink socket (disabled)
[    0.491864] type=2000 audit(1289200502.488:1): initialized
[    0.495478] highmem bounce pool size: 64 pages
[    0.495483] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.496892] VFS: Disk quotas dquot_6.5.2
[    0.496944] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.497031] msgmni has been set to 1723
[    0.497275] alg: No test for stdrng (krng)
[    0.497331] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.497335] io scheduler noop registered
[    0.497337] io scheduler anticipatory registered
[    0.497339] io scheduler deadline registered
[    0.497373] io scheduler cfq registered (default)
[    0.497496] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[    0.497503] pcieport 0000:00:01.0: setting latency timer to 64
[    0.497628] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
[    0.497639] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.497796] pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X
[    0.497806] pcieport 0000:00:1c.1: setting latency timer to 64
[    0.497969] pcieport 0000:00:1c.2: irq 27 for MSI/MSI-X
[    0.497980] pcieport 0000:00:1c.2: setting latency timer to 64
[    0.498139] pcieport 0000:00:1c.3: irq 28 for MSI/MSI-X
[    0.498150] pcieport 0000:00:1c.3: setting latency timer to 64
[    0.498322] isapnp: Scanning for PnP cards...
[    0.853193] isapnp: No Plug & Play device found
[    0.854505] Linux agpgart interface v0.103
[    0.854638] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.855052] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    0.863087] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.863094] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.863162] mice: PS/2 mouse device common for all mice
[    0.863215] rtc_cmos 00:07: RTC can wake from S4
[    0.863246] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[    0.863277] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.863288] cpuidle: using governor ladder
[    0.863290] cpuidle: using governor menu
[    0.863294] No iBFT detected.
[    0.863612] TCP cubic registered
[    0.863746] NET: Registered protocol family 10
[    0.864171] lo: Disabled Privacy Extensions
[    0.864467] Mobile IPv6
[    0.864470] NET: Registered protocol family 17
[    0.864485] Using IPI No-Shortcut mode
[    0.864544] PM: Resume from disk failed.
[    0.864553] registered taskstats version 1
[    0.865227] rtc_cmos 00:07: setting system clock to 2010-11-08 07:15:03 UTC (1289200503)
[    0.865270] Initalizing network drop monitor service
[    0.865298] Freeing unused kernel memory: 372k freed
[    0.865500] Write protecting the kernel text: 2500k
[    0.865524] Write protecting the kernel read-only data: 924k
[    0.867589] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.881488] udev[56]: starting version 163
[    0.984570] SCSI subsystem initialized
[    1.003084] libata version 3.00 loaded.
[    1.009587] thermal LNXTHERM:01: registered as thermal_zone0
[    1.009595] ACPI: Thermal Zone [THM0] (60 C)
[    1.011112] thermal LNXTHERM:02: registered as thermal_zone1
[    1.011119] ACPI: Thermal Zone [THM1] (65 C)
[    1.017064] usbcore: registered new interface driver usbfs
[    1.017090] usbcore: registered new interface driver hub
[    1.017118] usbcore: registered new device driver usb
[    1.022758] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.022936] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
[    1.022938] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[    1.022979] e1000e 0000:02:00.0: Disabling L1 ASPM
[    1.023001] e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.023043] e1000e 0000:02:00.0: setting latency timer to 64
[    1.023239] e1000e 0000:02:00.0: irq 29 for MSI/MSI-X
[    1.023555] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[    1.023722] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[    1.023731] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    1.023742] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    1.023745] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    1.023762] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    1.023781] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[    1.023793] ehci_hcd 0000:00:1d.7: debug port 1
[    1.027674] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    1.027882] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xee404000
[    1.041016] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.041036] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.041038] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.041041] usb usb1: Product: EHCI Host Controller
[    1.041043] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
[    1.041045] usb usb1: SerialNumber: 0000:00:1d.7
[    1.041120] usb usb1: configuration #1 chosen from 1 choice
[    1.041150] hub 1-0:1.0: USB hub found
[    1.041157] hub 1-0:1.0: 8 ports detected
[    1.041229] ahci 0000:00:1f.2: version 3.0
[    1.041244] ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    1.041289] ahci 0000:00:1f.2: irq 30 for MSI/MSI-X
[    1.041357] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode
[    1.041360] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part 
[    1.041366] ahci 0000:00:1f.2: setting latency timer to 64
[    1.041478] scsi0 : ahci
[    1.041569] scsi1 : ahci
[    1.041625] scsi2 : ahci
[    1.041681] scsi3 : ahci
[    1.041773] ata1: SATA max UDMA/133 abar m1024@0xee404400 port 0xee404500 irq 30
[    1.041775] ata2: DUMMY
[    1.041776] ata3: DUMMY
[    1.041778] ata4: DUMMY
[    1.041809] ata_piix 0000:00:1f.1: version 2.13
[    1.041817] ata_piix 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16
[    1.041851] ata_piix 0000:00:1f.1: setting latency timer to 64
[    1.041915] scsi4 : ata_piix
[    1.041970] scsi5 : ata_piix
[    1.042625] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1880 irq 14
[    1.042628] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1888 irq 15
[    1.043037] ata6: port disabled. ignoring.
[    1.043424] uhci_hcd: USB Universal Host Controller Interface driver
[    1.043632] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[    1.043801] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[    1.043807] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.043813] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.043817] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.043827] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.043863] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001800
[    1.043896] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.043899] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.043901] usb usb2: Product: UHCI Host Controller
[    1.043903] usb usb2: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[    1.043905] usb usb2: SerialNumber: 0000:00:1d.0
[    1.043970] usb usb2: configuration #1 chosen from 1 choice
[    1.043999] hub 2-0:1.0: USB hub found
[    1.044016] hub 2-0:1.0: 2 ports detected
[    1.044068] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.044075] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    1.044078] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.044086] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.044120] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001820
[    1.044153] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.044156] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.044158] usb usb3: Product: UHCI Host Controller
[    1.044161] usb usb3: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[    1.044163] usb usb3: SerialNumber: 0000:00:1d.1
[    1.044225] usb usb3: configuration #1 chosen from 1 choice
[    1.044253] hub 3-0:1.0: USB hub found
[    1.044259] hub 3-0:1.0: 2 ports detected
[    1.044464] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
[    1.044637] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
[    1.044644] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.044650] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    1.044653] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.044661] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    1.044696] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
[    1.044728] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.044731] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.044733] usb usb4: Product: UHCI Host Controller
[    1.044735] usb usb4: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[    1.044737] usb usb4: SerialNumber: 0000:00:1d.2
[    1.044801] usb usb4: configuration #1 chosen from 1 choice
[    1.044828] hub 4-0:1.0: USB hub found
[    1.044835] hub 4-0:1.0: 2 ports detected
[    1.044881] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    1.044887] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    1.044890] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    1.044897] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    1.044924] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001860
[    1.044955] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.044958] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.044960] usb usb5: Product: UHCI Host Controller
[    1.044962] usb usb5: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[    1.044965] usb usb5: SerialNumber: 0000:00:1d.3
[    1.045023] usb usb5: configuration #1 chosen from 1 choice
[    1.045050] hub 5-0:1.0: USB hub found
[    1.045056] hub 5-0:1.0: 2 ports detected
[    1.159439] e1000e 0000:02:00.0: Warning: detected ASPM enabled in EEPROM
[    1.204403] ata5.00: ATAPI: HL-DT-ST DVDRAM GSA-4083N, 1.08, max UDMA/33
[    1.215921] 0000:02:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:16:41:e1:f2:50
[    1.215924] 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection
[    1.216001] 0000:02:00.0: eth0: MAC: 2, PHY: 2, PBA No: 005301-003
[    1.224302] ata5.00: configured for UDMA/33
[    1.360031] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.361114] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[    1.361118] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    1.361121] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    1.400196] ata1.00: ATA-8: ST9320423AS, 0002SDM1, max UDMA/133
[    1.400199] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    1.402682] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[    1.402686] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    1.402690] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    1.404729] ata1.00: configured for UDMA/133
[    1.424429] ata1.00: configured for UDMA/133
[    1.424432] ata1: EH complete
[    1.424551] scsi 0:0:0:0: Direct-Access     ATA      ST9320423AS      0002 PQ: 0 ANSI: 5
[    1.428707] scsi 4:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-4083N 1.08 PQ: 0 ANSI: 5
[    1.435482] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    1.435536] sd 0:0:0:0: [sda] Write Protect is off
[    1.435539] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.435561] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.435698]  sda: sda1 sda2 sda3 sda4 < sda5 >
[    1.459701] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.472794] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.472797] Uniform CD-ROM driver Revision: 3.20
[    1.472878] sr 4:0:0:0: Attached scsi CD-ROM sr0
[    1.476764] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.476793] sr 4:0:0:0: Attached scsi generic sg1 type 5
[    1.816021] usb 4-1: new full speed USB device using uhci_hcd and address 2
[    1.999734] usb 4-1: New USB device found, idVendor=046d, idProduct=c52f
[    1.999738] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.999740] usb 4-1: Product: USB Receiver
[    1.999742] usb 4-1: Manufacturer: Logitech
[    1.999822] usb 4-1: configuration #1 chosen from 1 choice
[    2.014910] usbcore: registered new interface driver hiddev
[    2.016953] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input/input1
[    2.017015] generic-usb 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.2-1/input0
[    2.021831] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.1/input/input2
[    2.021909] generic-usb 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.2-1/input1
[    2.021926] usbcore: registered new interface driver usbhid
[    2.021928] usbhid: v2.6:USB HID core driver
[    2.025266] EXT4-fs (sda3): mounted filesystem with ordered data mode
[    2.244016] usb 5-1: new full speed USB device using uhci_hcd and address 2
[    2.414960] usb 5-1: New USB device found, idVendor=0a5c, idProduct=2110
[    2.414963] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.414966] usb 5-1: Product: BCM2045B
[    2.414967] usb 5-1: Manufacturer: Broadcom Corp
[    2.415050] usb 5-1: configuration #1 chosen from 1 choice
[    2.656015] usb 5-2: new full speed USB device using uhci_hcd and address 3
[    2.830960] usb 5-2: New USB device found, idVendor=0483, idProduct=2016
[    2.830963] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.830966] usb 5-2: Product: Biometric Coprocessor
[    2.830968] usb 5-2: Manufacturer: STMicroelectronics
[    2.831079] usb 5-2: configuration #1 chosen from 1 choice
[    3.372291] udev[405]: starting version 163
[    3.742514] ACPI: SSDT 7fef1d36 00282 (v01  PmRef  Cpu0Ist 00000100 INTL 20050513)
[    3.743111] ACPI: SSDT 7fef203d 0065A (v01  PmRef  Cpu0Cst 00000100 INTL 20050513)
[    3.745721] Monitor-Mwait will be used to enter C-1 state
[    3.745759] Monitor-Mwait will be used to enter C-2 state
[    3.745794] Monitor-Mwait will be used to enter C-3 state
[    3.745905] processor LNXCPU:00: registered as cooling_device0
[    3.746588] ACPI: SSDT 7fef1c6e 000C8 (v01  PmRef  Cpu1Ist 00000100 INTL 20050513)
[    3.746981] ACPI: SSDT 7fef1fb8 00085 (v01  PmRef  Cpu1Cst 00000100 INTL 20050513)
[    3.748438] processor LNXCPU:01: registered as cooling_device1
[    3.749139] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
[    3.749319] ACPI: Lid Switch [LID]
[    3.749374] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
[    3.749382] ACPI: Sleep Button [SLPB]
[    3.749542] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[    3.749546] ACPI: Power Button [PWRF]
[    3.820829] Non-volatile memory driver v1.3
[    3.822304] acpi device:05: registered as cooling_device2
[    3.822606] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:04/LNXVIDEO:01/input/input6
[    3.822614] ACPI: Video Device [VID1] (multi-head: yes  rom: no  post: no)
[    3.903635] input: PC Speaker as /devices/platform/pcspkr/input/input7
[    3.919513] ACPI: AC Adapter [AC] (on-line)
[    4.040850] ACPI: Battery Slot [BAT0] (battery present)
[    4.174412] i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    4.191963] thinkpad_acpi: ThinkPad ACPI Extras v0.23
[    4.191965] thinkpad_acpi: http://ibm-acpi.sf.net/
[    4.191967] thinkpad_acpi: ThinkPad BIOS 7IET36WW (1.17 ), EC 79HT50WW-1.07
[    4.191969] thinkpad_acpi: Lenovo ThinkPad T60, model 8744HDG
[    4.192494] thinkpad_acpi: radio switch found; radios are enabled
[    4.192584] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[    4.192587] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[    4.196917] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[    4.197698] Registered led device: tpacpi::thinklight
[    4.197726] Registered led device: tpacpi::power
[    4.197741] Registered led device: tpacpi::standby
[    4.197756] Registered led device: tpacpi::thinkvantage
[    4.200037] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one.
[    4.200373] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input8
[    4.239208] NET: Registered protocol family 23
[    4.353214] cfg80211: Using static regulatory domain info
[    4.353217] cfg80211: Regulatory domain: US
[    4.353219]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    4.353222]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[    4.353224]     (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[    4.353227]     (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[    4.353229]     (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[    4.353232]     (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[    4.353235]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[    4.353467] cfg80211: Calling CRDA for country: US
[    4.408815] intel_rng: FWH not detected
[    4.408974] [drm] Initialized drm 1.1.0 20060810
[    4.411380] nsc-ircc 00:0a: activated
[    4.411410] nsc-ircc, chip->init
[    4.411424] nsc-ircc, Found chip at base=0x164e
[    4.411472] nsc-ircc, driver loaded (Dag Brattli)
[    4.412639] IrDA: Registered device irda0
[    4.412642] nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500
[    4.528463] yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:2012]
[    4.528490] yenta_cardbus 0000:15:00.0: Using INTVAL to route CSC interrupts to PCI
[    4.528492] yenta_cardbus 0000:15:00.0: Routing CardBus interrupts to PCI
[    4.528499] yenta_cardbus 0000:15:00.0: TI: mfunc 0x01d01002, devctl 0x64
[    4.590989] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000/0x0
[    4.590994] serio: Synaptics pass-through port at isa0060/serio1/input0
[    4.635790] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9
[    4.762130] yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0cf0, PCI irq 16
[    4.762135] yenta_cardbus 0000:15:00.0: Socket status: 30000007
[    4.762141] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge I/O window: 0xa000 - 0xdfff
[    4.762148] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa000-0xdfff: clean.
[    4.763147] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge Memory window: 0xe4300000 - 0xe7ffffff
[    4.763150] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge Memory window: 0xe0000000 - 0xe3ffffff
[    4.866225] Bluetooth: Core ver 2.15
[    4.866263] NET: Registered protocol family 31
[    4.866265] Bluetooth: HCI device and connection manager initialized
[    4.866267] Bluetooth: HCI socket layer initialized
[    4.894130] Bluetooth: Generic Bluetooth USB driver ver 0.6
[    4.894337] usbcore: registered new interface driver btusb
[    5.040110] [drm] radeon kernel modesetting enabled.
[    5.040223] radeon 0000:01:00.0: power state changed by ACPI to D0
[    5.040266] radeon 0000:01:00.0: power state changed by ACPI to D0
[    5.040282] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    5.040297] radeon 0000:01:00.0: setting latency timer to 64
[    5.041437] [drm] radeon: Initializing kernel modesetting.
[    5.041583] [drm] register mmio base: 0xEE100000
[    5.041585] [drm] register mmio size: 65536
[    5.041682] ATOM BIOS: M54CSP/M52CSP
[    5.041915] [drm] GPU reset succeed (RBBM_STATUS=0x10000140)
[    5.041939] [drm] Generation 2 PCI interface, using max accessible memory
[    5.041942] [drm] radeon: VRAM 128M
[    5.041944] [drm] radeon: VRAM from 0x00000000 to 0x07FFFFFF
[    5.041946] [drm] radeon: GTT 512M
[    5.041947] [drm] radeon: GTT from 0x20000000 to 0x3FFFFFFF
[    5.042053] radeon 0000:01:00.0: irq 31 for MSI/MSI-X
[    5.042065] radeon 0000:01:00.0: radeon: using MSI.
[    5.042104] [drm] radeon: irq initialized.
[    5.043420] [drm] Detected VRAM RAM=128M, BAR=128M
[    5.043423] [drm] RAM width 128bits DDR
[    5.043779] [TTM] Zone  kernel: Available graphics memory: 441448 kiB.
[    5.043781] [TTM] Zone highmem: Available graphics memory: 1036812 kiB.
[    5.043797] [drm] radeon: 128M of VRAM memory ready
[    5.043799] [drm] radeon: 512M of GTT memory ready.
[    5.043814] [drm] GART: num cpu pages 131072, num gpu pages 131072
[    5.046466] [drm] RB2D reset succeed (RBBM_STATUS=0x10000140)
[    5.046498] [drm] radeon: 1 quad pipes, 1 z pipes initialized.
[    5.046720] [drm] PCIE GART of 512M enabled (table at 0x00040000).
[    5.046741] [drm] radeon: cp idle (0x10000C03)
[    5.046780] [drm] Loading R500 Microcode
[    5.046926] platform radeon_cp.0: firmware: requesting radeon/R520_cp.bin
[    5.123350] [drm] radeon: ring at 0x0000000020000000
[    5.123399] [drm] ring test succeeded in 3 usecs
[    5.123557] [drm] radeon: ib pool ready.
[    5.123647] [drm] ib test succeeded in 0 usecs
[    5.123808] [drm] Radeon Display Connectors
[    5.123810] [drm] Connector 0:
[    5.123812] [drm]   VGA
[    5.123814] [drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[    5.123817] [drm]   Encoders:
[    5.123819] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    5.123820] [drm] Connector 1:
[    5.123822] [drm]   LVDS
[    5.123824] [drm]   DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
[    5.123827] [drm]   Encoders:
[    5.123828] [drm]     LCD1: INTERNAL_LVTM1
[    5.123830] [drm] Connector 2:
[    5.123831] [drm]   DVI-I
[    5.123832] [drm]   HPD1
[    5.123835] [drm]   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[    5.123837] [drm]   Encoders:
[    5.123839] [drm]     DFP1: INTERNAL_KLDSCP_TMDS1
[    5.207852] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks
[    5.207855] iwl3945: Copyright(c) 2003-2009 Intel Corporation
[    5.207966] iwl3945 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    5.207981] iwl3945 0000:03:00.0: setting latency timer to 64
[    5.277212] iwl3945 0000:03:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
[    5.277215] iwl3945 0000:03:00.0: Detected Intel Wireless WiFi Link 3945ABG
[    5.277357] iwl3945 0000:03:00.0: irq 32 for MSI/MSI-X
[    5.364052] phy0: Selected rate control algorithm 'iwl-3945-rs'
[    5.377493] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    5.377497] hda_intel: probe_mask set to 0x1 for device 17aa:2010
[    5.377532] HDA Intel 0000:00:1b.0: setting latency timer to 64
[    5.578811] [drm] fb mappable at 0xD80C0000
[    5.578814] [drm] vram apper at 0xD8000000
[    5.578815] [drm] size 7257600
[    5.578817] [drm] fb depth is 24
[    5.578818] [drm]    pitch is 6912
[    5.669906] Console: switching to colour frame buffer device 210x65
[    5.678567] fb0: radeondrmfb frame buffer device
[    5.678568] registered panic notifier
[    5.678574] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0
[    5.698054] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
[    6.164607] Adding 1999864k swap on /dev/sda2.  Priority:-1 extents:1 across:1999864k 
[    6.521398] loop: module loaded
[    7.002051] EXT4-fs (sda1): mounted filesystem with ordered data mode
[    7.054780] EXT4-fs (sda5): mounted filesystem with ordered data mode
[    7.651288] fuse init (API version 7.13)
[   10.491141] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[   10.732383] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input11
[   11.843250] Bluetooth: L2CAP ver 2.14
[   11.843253] Bluetooth: L2CAP socket layer initialized
[   11.860150] Bluetooth: RFCOMM TTY layer initialized
[   11.860154] Bluetooth: RFCOMM socket layer initialized
[   11.860155] Bluetooth: RFCOMM ver 1.11
[   12.469229] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   12.469232] Bluetooth: BNEP filters: protocol multicast
[   12.657340] Bridge firewalling registered
[   12.960270] Bluetooth: SCO (Voice Link) ver 0.6
[   12.960273] Bluetooth: SCO socket layer initialized
[   13.200108] e1000e 0000:02:00.0: irq 29 for MSI/MSI-X
[   13.252150] e1000e 0000:02:00.0: irq 29 for MSI/MSI-X
[   13.252787] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   13.254848] iwl3945 0000:03:00.0: firmware: requesting iwlwifi-3945-2.ucode
[   13.287085] iwl3945 0000:03:00.0: loaded firmware version 15.32.2.9
[   13.360284] Registered led device: iwl-phy0::radio
[   13.360366] Registered led device: iwl-phy0::assoc
[   13.360385] Registered led device: iwl-phy0::RX
[   13.360405] Registered led device: iwl-phy0::TX
[   13.378798] ADDRCONF(NETDEV_UP): wlan0: link is not ready

Cheers,

A day without chilies is a day wasted
  • dom
  • #! Member
  • Offline
  • From: de
  • Registered: 2010-09-29
  • Posts: 56

Re: [SOLVED] Laptop boot hangs at starting udev

I can confirm the exact same problem with my T60. I'm not running statler at the moment, so I cant show my logs.

I have pretty much the same hardware (ATI X1300)...

[geek to live; don't live to geek]
  • From: Cape Town, SA
  • Registered: 2009-03-18
  • Posts: 48

Re: [SOLVED] Laptop boot hangs at starting udev

@dom

So you suspect ATI Radeon drivers?

Cheers,

Last edited by hapenny (2010-11-08 14:47:57)

A day without chilies is a day wasted
  • dom
  • #! Member
  • Offline
  • From: de
  • Registered: 2010-09-29
  • Posts: 56

Re: [SOLVED] Laptop boot hangs at starting udev

I don't know. But after the udev message it switches to a higher graphic resolution - if it starts...

currently im running ubuntu 10.04 without the problem. so there must be a solution. somewhere roll

[geek to live; don't live to geek]
  • dom
  • #! Member
  • Offline
  • From: de
  • Registered: 2010-09-29
  • Posts: 56

Re: [SOLVED] Laptop boot hangs at starting udev

any news about that issue? hmm

[geek to live; don't live to geek]
  • From: Cape Town, SA
  • Registered: 2009-03-18
  • Posts: 48

Re: [SOLVED] Laptop boot hangs at starting udev

dom wrote:

any news about that issue? hmm

Not from my side and this thread has all but died, do nobody else is apparently going to venture an opinion.

Seeing there's not much I can do about ATI drivers on this laptop, I uninstalled CB sad
I'm using Ubuntu 10.10 on it now - no hangups to speak of, especially not this issue.

I'm devastated because I so much prefer #! CB Alpha2.  Maybe I'll try again in a few months time neutral

Cheers,

A day without chilies is a day wasted
  • dom
  • #! Member
  • Offline
  • From: de
  • Registered: 2010-09-29
  • Posts: 56

Re: [SOLVED] Laptop boot hangs at starting udev

i prefer statler as well, that's the reason i'm looking into the issue again.

i might have found a solution. i disabled KMS (Kernel-Mode-Setting). I heard that is problematic with ATI sometimes.

time will tell if it fixed it. but after the "waiting for dev" it doesn't change into a higher solution anymore...

here is how i did it:

sudo gedit /etc/modprobe.d/radeon-kms.conf

and change it to: 

options radeon modeset=0

In some cases you need additionaly do:

sudo update-initramfs -u

Last edited by dom (2011-01-29 19:55:42)

[geek to live; don't live to geek]
  • From: Cape Town, SA
  • Registered: 2009-03-18
  • Posts: 48

Re: [SOLVED] Laptop boot hangs at starting udev

dom wrote:

i prefer statler as well, that's the reason i'm looking into the issue again.

sudo gedit /etc/modprobe.d/radeon-kms.conf

and change it to: 

options radeon modeset=0

Ahah!
Thanks for sharing your find. Seeing it's near sack-time for me, I'll try this tomorrow.
If we both post our findings it may help others.

Cheers,

Last edited by hapenny (2010-11-28 20:33:34)

A day without chilies is a day wasted

11 Reply by dom

  • dom
  • #! Member
  • Offline
  • From: de
  • Registered: 2010-09-29
  • Posts: 56

Re: [SOLVED] Laptop boot hangs at starting udev

Hey, good news! So far no problems. I think it did the trick! also no side effects as far as i can tell.

[geek to live; don't live to geek]
  • From: Cape Town, SA
  • Registered: 2009-03-18
  • Posts: 48

Re: [SOLVED] Laptop boot hangs at starting udev

dom wrote:

Hey, good news! So far no problems. I think it did the trick! also no side effects as far as i can tell.

Agreed, dom. I also have had no re-occurrence since doing the above (on the 29th). Admittedly I likely have rebooted less  times than you, but still.

Very, very encouraging for me as I prefer this distro above all else ATM.

I'm going to edit my 1st post to add [SOLVED] smile

Cheers,

A day without chilies is a day wasted