CrunchBang Linux Pastebin - collaborative debugging

pastebin is a collaborative debugging tool allowing you to share and modify code snippets while chatting on IRC, IM or a message board.

This site is developed to XHTML and CSS2 W3C standards. If you see this paragraph, your browser does not support those standards and you need to upgrade. Visit WaSP for a variety of options.

CrunchBang Linux Pastebin

Posted by taylorbyte on Mon 16th Jul 04:02 (modification of post by view diff)
download | new post

  1. $ wodim -v dev=/dev/sr0 -blank=fast
  2. TOC Type: 1 = CD-ROM
  3. scsidev: '/dev/sr0'
  4. devname: '/dev/sr0'
  5. scsibus: -2 target: -2 lun: -2
  6. Linux sg driver version: 3.5.27
  7. Wodim version: 1.1.11
  8. SCSI buffer size: 64512
  9. Device type    : Removable CD-ROM
  10. Version        : 5
  11. Response Format: 2
  12. Capabilities   :
  13. Vendor_info    : 'PIONEER '
  14. Identification : 'BD-RW   BDR-203 '
  15. Revision       : '1.10'
  16. Device seems to be: Generic mmc2 DVD-R/DVD-RW.
  17. Current: 0x000A (CD-RW)
  18. Profile: 0x0043 (BD-RE)
  19. Profile: 0x0042 (BD-R random recording)
  20. Profile: 0x0041 (BD-R sequential recording)
  21. Profile: 0x0040 (BD-ROM)
  22. Profile: 0x0010 (DVD-ROM)
  23. Profile: 0x002B (DVD+R/DL)
  24. Profile: 0x001A (DVD+RW)
  25. Profile: 0x001B (DVD+R)
  26. Profile: 0x0016 (DVD-R/DL layer jump recording)
  27. Profile: 0x0015 (DVD-R/DL sequential recording)
  28. Profile: 0x0011 (DVD-R sequential recording)
  29. Profile: 0x0013 (DVD-RW restricted overwrite)
  30. Profile: 0x0014 (DVD-RW sequential recording)
  31. Profile: 0x0012 (DVD-RAM)
  32. Profile: 0x0002 (Removable disk)
  33. Profile: 0x000A (CD-RW) (current)
  34. Profile: 0x0009 (CD-R) (current)
  35. Profile: 0x0008 (CD-ROM)
  36. Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
  37. Driver flags   : MMC-3 SWABAUDIO BURNFREE
  38. Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
  39. Drive buf size : 1206272 = 1178 KB
  40. Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
  41. communication breaks or freezes immediately after that.
  42. Current Secsize: 2048
  43. ATIP info from disk:
  44.   Indicated writing power: 5
  45.   Reference speed: 2
  46.   Is not unrestricted
  47.   Is erasable
  48.   ATIP start of lead in:  -11635 (97:26/65)
  49.   ATIP start of lead out: 359849 (79:59/74)
  50.   1T speed low:  0 (reserved val  0) 1T speed high:  4
  51.   2T speed low:  8 2T speed high:  0 (reserved val 10)
  52.   power mult factor: 4 6
  53.   recommended erase/write power: 3
  54.   A1 values: 02 4C B0
  55.   A2 values: 4A C8 36
  56. Disk type:    Phase change
  57. Manuf. index: 3
  58. Manufacturer: CMC Magnetics Corporation
  59. Speed set to 706 KB/s
  60. Starting to write CD/DVD at speed   4.0 in real BLANK mode for single session.
  61. Last chance to quit, starting real write in    0 seconds. Operation starts.
  62. Performing OPC...
  63. wodim: OPC failed.
  64. Blanking PMA, TOC, pregap
  65. Errno: 5 (Input/output error), blank unit scsi sendcmd: no error
  66. CDB:  A1 01 00 00 00 00 00 00 00 00 00 00
  67. status: 0x2 (CHECK CONDITION)
  68. Sense Bytes: 72 0B 47 00 00 00 00 0E 09 0C 00 00 00 00 00 00
  69. Sense Key: 0x7 Data Protect, Segment 11
  70. Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0
  71. Sense flags: Blk 0 (not valid) end of medium
  72. cmd finished after 5.825s timeout 9600s
  73. wodim: Cannot blank disk, aborting.
  74. wodim: Some drives do not support all blank types.
  75. wodim: Try again with wodim blank=all.

Submit a correction or amendment below (click here to make a fresh posting)
After submitting an amendment, you'll be able to view the differences between the old and new posts easily.

Syntax highlighting:

To highlight particular lines, prefix each line with @@


Remember me