CrunchBang Linux Pastebin - collaborative debugging

pastebin is a collaborative debugging tool allowing you to share and modify code snippets while chatting on IRC, IM or a message board.

This site is developed to XHTML and CSS2 W3C standards. If you see this paragraph, your browser does not support those standards and you need to upgrade. Visit WaSP for a variety of options.

CrunchBang Linux Pastebin

Posted by lJ6il on Sun 29th Jul 14:28 (modification of post by view diff)
download | new post

  1. simpleuser@ubuntu:~$ sudo smartctl -a /dev/sda
  2. smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-27-generic] (local build)
  3. Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
  4.  
  5. === START OF INFORMATION SECTION ===
  6. Model Family:     SAMSUNG SpinPoint F1 DT
  7. Device Model:     SAMSUNG HD502IJ
  8. Serial Number:    S13TJ1KQ620439
  9. LU WWN Device Id: 5 0000f0 00b264093
  10. Firmware Version: 1AA01112
  11. User Capacity:    500 106 780 160 bytes [500 GB]
  12. Sector Size:      512 bytes logical/physical
  13. Device is:        In smartctl database [for details use: -P show]
  14. ATA Version is:   8
  15. ATA Standard is:  ATA-8-ACS revision 3b
  16. Local Time is:    Sun Jul 29 15:27:20 2012 CEST
  17. SMART support is: Available - device has SMART capability.
  18. SMART support is: Enabled
  19.  
  20. === START OF READ SMART DATA SECTION ===
  21. SMART overall-health self-assessment test result: PASSED
  22.  
  23. General SMART Values:
  24. Offline data collection status:  (0x00) Offline data collection activity
  25.                                         was never started.
  26.                                         Auto Offline Data Collection: Disabled.
  27. Self-test execution status:      ( 114) The previous self-test completed having
  28.                                         the read element of the test failed.
  29. Total time to complete Offline
  30. data collection:               ( 7534) seconds.
  31. Offline data collection
  32. capabilities:        (0x7b) SMART execute Offline immediate.
  33.                                         Auto Offline data collection on/off support.
  34.                                         Suspend Offline collection upon new
  35.                                         command.
  36.                                         Offline surface scan supported.
  37.                                         Self-test supported.
  38.                                         Conveyance Self-test supported.
  39.                                         Selective Self-test supported.
  40. SMART capabilities:            (0x0003) Saves SMART data before entering
  41.                                         power-saving mode.
  42.                                         Supports SMART auto save timer.
  43. Error logging capability:        (0x01) Error logging supported.
  44.                                         General Purpose Logging supported.
  45. Short self-test routine
  46. recommended polling time:        (   2) minutes.
  47. Extended self-test routine
  48. recommended polling time:        ( 126) minutes.
  49. Conveyance self-test routine
  50. recommended polling time:        (  14) minutes.
  51. SCT capabilities:              (0x003f)       SCT Status supported.
  52.                                         SCT Error Recovery Control supported.
  53.                                         SCT Feature Control supported.
  54.                                         SCT Data Table supported.
  55.  
  56. SMART Attributes Data Structure revision number: 16
  57. Vendor Specific SMART Attributes with Thresholds:
  58. ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  59.   1 Raw_Read_Error_Rate     0x000f   100   099   051    Pre-fail  Always       -       32
  60.   3 Spin_Up_Time            0x0007   088   088   011    Pre-fail  Always       -       4530
  61.   4 Start_Stop_Count        0x0032   099   099   000    Old_age   Always       -       1514
  62.   5 Reallocated_Sector_Ct   0x0033   100   100   010    Pre-fail  Always       -       7
  63.   7 Seek_Error_Rate         0x000f   100   100   051    Pre-fail  Always       -       0
  64.   8 Seek_Time_Performance   0x0025   100   100   015    Pre-fail  Offline      -       10636
  65.   9 Power_On_Hours          0x0032   097   097   000    Old_age   Always       -       13411
  66.  10 Spin_Retry_Count        0x0033   100   100   051    Pre-fail  Always       -       0
  67.  11 Calibration_Retry_Count 0x0012   100   100   000    Old_age   Always       -       0
  68.  12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       1302
  69.  13 Read_Soft_Error_Rate    0x000e   100   099   000    Old_age   Always       -       31
  70. 183 Runtime_Bad_Block       0x0032   100   100   000    Old_age   Always       -       0
  71. 184 End-to-End_Error        0x0033   100   100   099    Pre-fail  Always       -       0
  72. 187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       40
  73. 188 Command_Timeout         0x0032   100   100   000    Old_age   Always       -       0
  74. 190 Airflow_Temperature_Cel 0x0022   069   054   000    Old_age   Always       -       31 (Min/Max 30/31)
  75. 194 Temperature_Celsius     0x0022   067   054   000    Old_age   Always       -       33 (Min/Max 30/34)
  76. 195 Hardware_ECC_Recovered  0x001a   100   100   000    Old_age   Always       -       86084
  77. 196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       7
  78. 197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
  79. 198 Offline_Uncorrectable   0x0030   100   100   000    Old_age   Offline      -       1
  80. 199 UDMA_CRC_Error_Count    0x003e   100   100   000    Old_age   Always       -       0
  81. 200 Multi_Zone_Error_Rate   0x000a   100   100   000    Old_age   Always       -       0
  82. 201 Soft_Read_Error_Rate    0x000a   253   253   000    Old_age   Always       -       0
  83.  
  84. SMART Error Log Version: 1
  85. ATA Error Count: 17 (device log contains only the most recent five errors)
  86.         CR = Command Register [HEX]
  87.         FR = Features Register [HEX]
  88.         SC = Sector Count Register [HEX]
  89.         SN = Sector Number Register [HEX]
  90.         CL = Cylinder Low Register [HEX]
  91.         CH = Cylinder High Register [HEX]
  92.         DH = Device/Head Register [HEX]
  93.         DC = Device Command Register [HEX]
  94.         ER = Error register [HEX]
  95.         ST = Status register [HEX]
  96. Powered_Up_Time is measured from power on, and printed as
  97. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  98. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  99.  
  100. Error 17 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  101.   When the command that caused the error occurred, the device was active or idle.
  102.  
  103.   After command completion occurred, registers were:
  104.   ER ST SC SN CL CH DH
  105.   -- -- -- -- -- -- --
  106.   40 51 00 18 ac 34 ef  Error: UNC at LBA = 0x0f34ac18 = 255110168
  107.  
  108.   Commands leading to the command that caused the error were:
  109.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  110.   -- -- -- -- -- -- -- --  ----------------  --------------------
  111.   c8 00 00 70 ab 34 ef 08   6d+19:02:33.540  READ DMA
  112.   c8 00 00 20 d3 34 ef 08   6d+19:02:33.530  READ DMA
  113.   c8 00 00 10 55 26 ef 08   6d+19:02:33.520  READ DMA
  114.   c8 00 e8 c8 83 33 ef 08   6d+19:02:33.520  READ DMA
  115.   c8 00 00 c0 82 33 ef 08   6d+19:02:33.510  READ DMA
  116.  
  117. Error 16 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  118.   When the command that caused the error occurred, the device was active or idle.
  119.  
  120.   After command completion occurred, registers were:
  121.   ER ST SC SN CL CH DH
  122.   -- -- -- -- -- -- --
  123.   40 51 00 78 90 34 ef  Error: UNC at LBA = 0x0f349078 = 255103096
  124.  
  125.   Commands leading to the command that caused the error were:
  126.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  127.   -- -- -- -- -- -- -- --  ----------------  --------------------
  128.   c8 00 00 00 90 34 ef 08      05:10:10.550  READ DMA
  129.   ec 00 00 00 00 00 a0 08      05:10:10.530  IDENTIFY DEVICE
  130.   ef 03 46 00 00 00 a0 08      05:10:10.530  SET FEATURES [Set transfer mode]
  131.   ec 00 00 00 00 00 a0 08      05:10:09.510  IDENTIFY DEVICE
  132.  
  133. Error 15 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  134.   When the command that caused the error occurred, the device was active or idle.
  135.  
  136.   After command completion occurred, registers were:
  137.   ER ST SC SN CL CH DH
  138.   -- -- -- -- -- -- --
  139.   40 51 00 78 90 34 ef  Error: UNC at LBA = 0x0f349078 = 255103096
  140.  
  141.   Commands leading to the command that caused the error were:
  142.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  143.   -- -- -- -- -- -- -- --  ----------------  --------------------
  144.   c8 00 00 00 90 34 ef 08      05:10:08.550  READ DMA
  145.   ec 00 00 00 00 00 a0 08      05:10:08.530  IDENTIFY DEVICE
  146.   ef 03 46 00 00 00 a0 08      05:10:08.530  SET FEATURES [Set transfer mode]
  147.   ec 00 00 00 00 00 a0 08      05:10:07.470  IDENTIFY DEVICE
  148.  
  149. Error 14 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  150.   When the command that caused the error occurred, the device was active or idle.
  151.  
  152.   After command completion occurred, registers were:
  153.   ER ST SC SN CL CH DH
  154.   -- -- -- -- -- -- --
  155.   40 51 00 78 90 34 ef  Error: UNC at LBA = 0x0f349078 = 255103096
  156.  
  157.   Commands leading to the command that caused the error were:
  158.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  159.   -- -- -- -- -- -- -- --  ----------------  --------------------
  160.   c8 00 00 00 90 34 ef 08      05:10:06.500  READ DMA
  161.   c8 00 00 00 8f 34 ef 08      05:10:06.490  READ DMA
  162.   c8 00 00 00 8e 34 ef 08      05:10:06.490  READ DMA
  163.   c8 00 00 00 8d 34 ef 08      05:10:06.490  READ DMA
  164.   c8 00 00 00 8c 34 ef 08      05:10:06.490  READ DMA
  165.  
  166. Error 13 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  167.   When the command that caused the error occurred, the device was active or idle.
  168.  
  169.   After command completion occurred, registers were:
  170.   ER ST SC SN CL CH DH
  171.   -- -- -- -- -- -- --
  172.   40 51 00 79 90 34 ef  Error: UNC at LBA = 0x0f349079 = 255103097
  173.  
  174.   Commands leading to the command that caused the error were:
  175.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  176.   -- -- -- -- -- -- -- --  ----------------  --------------------
  177.   c8 00 00 68 90 34 ef 08      07:39:18.270  READ DMA
  178.   c8 00 00 68 8f 34 ef 08      07:39:18.070  READ DMA
  179.   ea 00 00 b7 02 1c a0 08      07:39:18.070  FLUSH CACHE EXT
  180.   ea 00 00 af 02 1c a0 08      07:39:17.620  FLUSH CACHE EXT
  181.   ca 00 08 c8 22 23 ef 08      07:39:17.620  WRITE DMA
  182.  
  183. SMART Self-test log structure revision number 0
  184. Warning: ATA Specification requires self-test log structure revision number = 1
  185. Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
  186. # 1  Short offline       Completed: read failure       20%     13411         255103096
  187. # 2  Short offline       Aborted by host               20%     13411         -
  188.  
  189. Note: selective self-test log revision number (0) not 1 implies that no selective self-test has ever been run
  190. SMART Selective self-test log data structure revision number 0
  191. Note: revision number not 1 implies that no selective self-test has ever been run
  192.  SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
  193.     1        0        0  Not_testing
  194.     2        0        0  Not_testing
  195.     3        0        0  Not_testing
  196.     4        0        0  Not_testing
  197.     5        0        0  Not_testing
  198. Selective self-test flags (0x0):
  199.   After scanning selected spans, do NOT read-scan remainder of disk.
  200. If Selective self-test is pending on power-up, resume after 0 minute delay.
  201.  
  202. simpleuser@ubuntu:~$

Submit a correction or amendment below (click here to make a fresh posting)
After submitting an amendment, you'll be able to view the differences between the old and new posts easily.

Syntax highlighting:

To highlight particular lines, prefix each line with @@


Remember me